Ninebot Scooter Won’t Turn On (Reasons & Solutions)

The Ninebot electric scooter is one of our generation’s top inventions; having one of these new generational tech makes you look cool.

However, there are certain issues surrounding this advanced piece of hardware.

If you are ever stranded and can’t turn on the Ninebot electric scooter, consider going through this article for common fixes. 

The most common reason the Ninebot electric scooter doesn’t turn on is a connection problem. Since the scooter is electric, the problem is always an electrical fault ranging from faulty wiring or loose terminals. Troubleshooting the electric scooter should resolve the problem. 

Why Will My Ninebot Scooter Not Turn on?

Ninebot Scooter Won't Turn On

If your Ninebot electric scooter isn’t turning on, ensure the cable on the handlebar is functioning properly.

A loose connection can cause partial contact or sometimes break the circuit, which results in the electric scooter being dead in the water. 

Or maybe you just forgot to plug it in for a charge. Dead batteries are a common issue with electric scooters.

Sometimes you plug it in, but it won’t charge; this could be as a result of some of a few reasons listed below: 

  • A defective battery 
  • Extremely cold temperatures prevent the cells from acquiring a charge
  • Improper charging 
  • A degrading battery capacity

A dead battery is commonly mistaken for a low one. A dead battery doesn’t turn on anymore, while a low battery is just low on energy. You can easily recharge a low battery

However, you can also revive a dead battery. In some cases, the battery isn’t completely gone; charging it might bring it back to life, but it would take longer to acquire a charge. 

Segway Ninebot Es1 Won’t Turn On

Electric scooters come with the problem of not starting up after a while, and it’s no different with the Segway Ninebot Es1.

And much like other electric scooters, the Segway Ninebot Es1 has a fix for this.

To know why the scooter isn’t turning on, you must check a few things and ensure they are in place or connected properly. 

Since its release on the market, the Segway Ninebot Es1 has taken over the scooter market with its sleek design and all-electric specs.

The Segway Es1 is a great electric scooter that makes commuting a lot easier with its 8-inch large tires and an all-electric engine that can go up to 12.4 miles after a full charge. 

See also  Ninebot Scooter Blinking Red And White! (Reasons & Solutions)

The electric scooter also has cool features like shock absorbers, making commuting much more fun with an ES1 than on foot.

You don’t necessarily need to know how to fix the scooter; you can always drop by and ask for a professional’s help.

Below is a table of the pros and cons of this ride:

Bluetooth connectionToo heavy for younger kids
Cruise control
Digital display
Anti braking system
Shock absorption

Does Segway Es1 Have an Impressive Build?

Asides from the somewhat common fault of the Es1 not turning on after a full charge, the Ninebot Electric scooter has a pretty impressive build.

The Es1 is a typical lightweight electric scooter with a streamlined body to keep things simple. 

It may have a simple design, but it brings a flair of “Cool.” The frame material is a mix of aircraft-grade aluminum and high-density polymer, meaning the scooter can stand the test of time.

Its lightweight makes it very easy to carry around. For a scooter that small, the Es1 sure does have some speed.

Thanks to the 500W hub motor housed inside the scooter, the Es1 can crank up to 12 miles per hour, covering a distance of 15.5 miles.

The scooter can easily navigate over a wide range of terrains and climb inclinations up to 10 degrees. 

Segway Ninebot ES2 Not Turning On

Like its predecessor, the ES2 has similar problems to the ES1. However, the Segway Ninebot Kick Scooter ES2 is an improvement on the ES1.

ES2 does have some impressive components strapped to the frame.

The Ninebot paid a little more attention to the shock absorption of the ES2, giving the model some additional shock absorption compared to the first model. 

They also made some improvements on the front stick. On the ES1, the stick stays in one place, while on the ES2, it is foldable.

With the ES2, you get running lights underneath the scooter’s footpad and an actual taillight; in the ES1, you have a tail reflector. 

Also read: Ninebot ES2 Troubleshooting (Must Follow This)

Regarding the braking system, the ES2 has an electronic brake on the handle and a rear foot brake which you can activate by shifting your body weight to the back of the scooter.

The ES2 also has a nicely designed handlebar and cockpit with a high-quality finish. 

See also  Swagtron Swagger 3 Not Working (Reasons & Solutions)

The ES2 Segway Ninebot Kickscooter has a solid, airless 20.3-centimeter tire made from a fairly hard compound.

The head-up display on the ES2 is quite impressive. You can see the battery level and speed you’re going at in direct sunlight due to the bright LCD on this small cockpit. 

How To Fix a Ninebot Scooter That Won’t Turn On?

You will often encounter problems like your scooter not starting with electric scooters; the Ninebot Scooter series isn’t any different.

It doesn’t matter what model of the Ninebot electric scooter you have; the range of problems is usually the same. 

First, you need to know the key things that could cause your electric scooter to stop turning on; one key thing to check is the electric scooter’s battery.

Sometimes, the reason the scooter won’t come on is as simple as a low battery; you can fix this by charging the battery again. 

If charging the battery doesn’t fix the problem, then the battery might be dead. A dead battery can no longer acquire a charge when plugged in. 

Sometimes, you can fix this by leaving the battery plugged in for a longer period, let’s say, an entire night.

Leaving it on a power supply for that long could spark it back to life. However, if that doesn’t work, you must consider changing the electric scooter’s battery.

Also read: Segway Ninebot Es2 Won’t Turn On? (Reasons & Solutions)

You can check the battery’s voltage capacity with a multimeter. But don’t be too hasty to change the battery; check if it is truly the problem. 

Check the scooter’s fuse circuit breaker if the battery isn’t the problem. The fuse keeps the scooter and its wiring safe if something goes wrong.

The scooter’s fuse circuit breaker will cut off power if there’s an electrical fault causing too much current to flow into the scooter. 

There will be a lot of fuse circuit breakers on the scooter to safeguard each circuit in the scooter. The only way to fix a blown fuse is by replacing it. 

You can identify a blown fuse by checking each of them. Take your time and look at each fuse’s wire to identify if it is a blown fuse. 

Ninebot Scooter Just Stopped and Didn’t Turn on Anymore

If your Ninebot Kick scooter just stopped while you were using it and isn’t working anymore, the first thing to do is check if the handlebar cable is in the right place.

See also  Ninebot Scooter Not Accelerating (Possible Causes & Fixes)

If it is already connected, then disconnect and connect it back. It is important to remember that this is an all-electric scooter, so the problem will always be an electrical fault.

If that doesn’t help, then check the electric scooter’s battery. It is always between the wiring and the battery, so check these before panicking. 

Here Is How To Make Ninebot GoKart Faster (Easy Steps)

Ninebot Scooter Problems and Fixes

Sometimes, the Ninebot electric scooter won’t turn on because of a battery problem, but to be sure, you have to check the electric scooter’s battery first.

Below are some steps to check if the battery of the Ninebot is still functioning properly:

  • Step One: Pop open the scooter’s back cover.
  • Step Two: Get a multimeter and put it to “Voltage Mode.”
  • Step Three: Connect both terminals of the multimeter to the terminals of the battery to check its capacity.
  • If the voltage is okay, proceed to step four to check for a short circuit.
  • Step Four: Connect both terminals of the multimeter to the controller to check for a short circuit.
  • If there is no short circuit in the connection, proceed to the next step. 
  • Step Five: Check the cables connecting to the display monitor. In some cases, the wires wear out over time, causing the scooter not to start up. 
  • Step Six: If the connecting cable is the problem, you can remove the junction unit and connect the wires directly. 
  • Step Seven: If the scooter still doesn’t start up, repeat Step Six for all the connecting wires. If the problem is with the connecting wires, then directly connecting them will resolve it

Connecting directly at certain points is impossible because you can’t tell where the wires lead.

In such a case, try removing the wires from the connection point, clean the portion you removed them from to eliminate dust and rust and solder it back in firmly. 


The Ninebot electric kickscooter is taking the scooter world by storm, but it does have a few downsides.

Having a vast market means having a lot of customers with complaints, mainly about the scooter’s inability to either charge or turn on.

However, one thing to remember is that it is an electric scooter; the problem is always electrical.

Similar Posts