9 Most Common Aovo Pro Scooter Problems!
Aovo Pro is one of the best models of electric scooters. With its durability, long-lasting life span, and some of them are waterproof.
The scooter is very comfortable and easy to ride. But even if it has all these features, there are some common problems users of aovo pro experience.
Problems that make the scooter malfunction, get damaged or even lose its function as a whole.
The scooter might show problems ranging from not turning on, battery not charging, battery not working, the charger not charging the battery, the charger burnt, faulty speed controller, damaged electrical components, the scooter not moving, faulty or damaged brakes or even the wheels can be defective.
Some of these troubles might be simple and easy to handle, while others may be severe and require an experienced technician’s service.
Nonetheless, I’ll highlight some common problems with your Aovo Pro scooter and ways to fix them.
What Are the Most Common Aovo Pro Scooter Problems, and How to Fix Them?
The Aovo Pro scooter faces some challenges, which might be minor or major damage, and these problems have solutions.
Although some problems require more repair costs than others, your scooter can still work fine again. Most of these scooter issues are associated with the battery or charger.
Below are some common problems with the Aovo Pro scooter.
#1. Malfunction After a Rainy Day
Some of these scooters are waterproof and can withstand some water pressure.
Although they all have their resistance level, there is no perfect resistant electric device. Leaving your scooter in the rain for too long is not advisable.
No matter how resistant it is, some small spaces can channel the water to the inside of the scooter.
Always dry your scooter after each use in rain or a saturated area, and also try to avoid staying in the water for too long.
#2. Scooter Cuts Out
You might be riding your scooter, and suddenly, it stops; this happens often and might be your circuit breaker.
Open up the circuit breaker to check for any cut or burn of the wires or other components, and if not, you can allow it to rest for a while, then start it again.
Even if you continue riding after letting the scooter rest, there is a high possibility that it will still stop. Hence, taking it to a technician for a proper checkup is best.
#3. The Scooter Won’t Move
The inability of your scooter to move might be associated with many things, such as the battery, charger, or charging point.
Check your scooter battery for any damages or to see if it’s working since a damaged battery can not power the scooter to move.
Also, check the switch to see whether it is properly turned on or off because you might be in a hurry and forget to turn your switch on.
Check if the switch is faulty. Your switch might be broken and cannot turn on; when it is broken, it either becomes stiff or easy to press.
Your charger might be faulty, so you cannot charge your scooter. You need to get a new charger for your scooter if it’s your charger.
Your charging port might be damaged due to improper or forceful charging and unplugging of the scooter charger.
All you have to do is to go to an electrician so you can replace your scooter charging port with a new and good one.
#4. Brake Lever System
Some scooters have open brake systems, while others have closed ones. In both systems, the brake lever system acts so that when brakes are applied, the speed controller stops working.
Disconnect your brake with your speed controller to test for an open brake lever system. If the scooter moves, then it is an open Vrije lever system.
Disconnect your brake from your speed controller to test for a closed brake lever system.
After that, you’ll put the two terminals (bridge) in the connector of your speed controller. That is where the brake switch was plugged out from.
If the scooter moves when the two terminals are joined, your electric scooter has a closed brake lever system.
So if the brake lever is faulty, it might always signal to the speed controller that it is on, and therefore, the speed controller cannot function properly.
Take your scooter to a technician to change your brake lever system.
#5. Speed Controller
The speed controller regulates how fast or slow your electric scooter will move, although the rider applies the speed.
When you have a faulty speed controller, the scooter will likely show one of two signs or malfunctions.
The scooter might not move at all, which means the speed controller is on a speed of 0, so your scooter cannot move more than that speed.
It also makes your scooter frequently move very slowly when riding, making riding dull. Also, your scooter might always be moving at high speed without change or a decline in the speed.
If you notice that your scooter is always at high speed, even when you try to reduce it while riding, you should know it’s your speed controller.
In both cases, you should see an experienced technician for a change.
#6. Battery
The battery has a lot of signs whenever it’s faulty or damaged. While some are easy to detect, others are difficult to detect.
The scooter might move slowly. The speed controller receives voltage from the battery, and if the battery cannot provide enough voltage to power the speed controller, the scooter will be slow.
The scooter might also refuse to turn on, as said earlier.
The scooter might charge very slowly, the battery won’t last, the battery may never charge to full, or the battery will be charged but cannot power the parts of the scooter.
#7. Brakes
Your brakes might be damaged, so you can not have a quick pause, and this is a very severe case since it can cause accidents.
#8. Flat Tires
If your tires are frequently flat, you’re fixing the wheels properly on the scooter or not getting the actual wheel size.
#9. Charging Port
If you suspect your charging port is faulty, you can detect if your charging port is not accepting voltage by using a voltmeter.
Even if your battery and charger are good, but your port is faulty, your battery cannot receive voltage from the charger.
The table below shows the solutions to some major problems of the Aovo Pro electric scooter.
| Problems | Solutions |
|---|---|
| Malfunction after a rainy day | Go to an electrician for a checkup, and always dry your scooter after use before storing it. |
| Scooter cuts out | Change the circuit breaker. |
| The scooter won’t move | Check for the source of the fault and repair or replace it. |
| Brake lever system | Change the brake lever. |
| Speed controller | Replace your speed controller. |
| Battery | Get a new scooter battery. |
| Brakes | Replace with new brakes. |
| Flat tires | Get the appropriate size and correctly fix the tires. |
| Charger | Get a new charger. |
| Charging port | Visit a technician for a replacement of your charging. |
How Do You Troubleshoot an Aovo Pro Scooter?
You can troubleshoot your aovo pro scooter to avoid problems or malfunctions and have a long-lasting one.
No matter how durable and expensive a scooter is, maintenance will also contribute to how long the scooter will last.
Also, if you maintain your scooter well, fewer problems or damage will occur.
And remember, you cannot escape problems even if you maintain your scooter very well, only that there will be fewer problems than a non-maintained scooter.
Below are some ways to troubleshoot your aovo pro scooter.
- Check your battery.
- Confirm if your charger is functioning.
- Charge a stored battery thoroughly.
- Using your voltmeter, check your charging port and other scooter parts.
- Thoroughly check your brake lever switch and circuit breaker.
- Always replace a faulty part or component of the scooter.
- Avoid overexposure to water or dirt.
- Check your speed controller.
- Always check if your brakes are functioning before starting a ride.
- Get components like chargers, batteries, brakes, tires, and other parts meant for that particular scooter.
Always pay attention to even the slightest issues with your scooter, as they can generate something severe if not taken care of.
